Hardware products

8-channel relay output module with system fault alarm function (VM068)

Supports Modbus RTU communication protocol and 8 relay switch outputs, acting as an independent hardware watchdog for connected computers, automatically safeguarding the normal operation of monitored computers to prevent crashes, blue screens, power outages, and application failures. Once any fault is detected, it automatically triggers alarms via switch output.

16-channel 48VDC high-speed relay input signal adjustment board (VM048)

It integrates a high-speed 48VDC relay with an action time of only 1ms, receives up to 16 channels of 48VDC switch input signals, converts them into dry contacts, and can be used for SOE signal acquisition in industrial real-time monitoring systems. Multiple VM048 boards can be inserted into the matching rack.

USB Drive Data Acquisition Module (COMUSB01)

It can collect data from two serial ports, supports Modbus RTU communication protocol and custom protocols, can store up to 128MB of historical data, and automatically exports historical data by inserting USB 1.0 drives. The exported CSV files can be easily analyzed and summarized using Excel. Can be used to automatically download data to USB drives during manual inspections.

Parallel Port Printing Information Acquisition Card (PPRTDC)

Can be plugged into the PCI slot of desktop computers or servers to connect parallel devices and quickly collect parallel data. Can be used to replace parallel port printers, enabling paperless electronic storage of printed information

Industrial Keyboard (VKB023)

Industrial-specific keyboard (waterproof, shockproof, with tracking ball) uses universal keyboard and mouse interfaces (PS/2). The keys and layout are customizable, supporting various key combinations, making it convenient for industrial monitoring and control operators, preventing misoperation, and ensuring high reliability.

Switch signal collector (DIM16)

Supports data collection of 16 dry contact switches and signal data, and connects to wired telephone interfaces, making it convenient for remote software to dial devices via modem for remote fault diagnosis and condition checks.

Communication interface server (VM003 series)

By integrating industrial high-reliability computers and their embedded software, it is possible to:
1. Network printing information collection server;
2. OTT RLS water level data acquisition server (provides dedicated SFTP file transmission for external data transmission);
3. Communication interface server (using VMCS configuration configuration, capable of collecting data from multiple Modbus and custom protocol serial devices, then providing Modbus Slave data services, supporting dual-machine hot standby).

Serial communication encryption and decryption module (VM004)

Supports one-to-one or one-to-many serial communication between SCADA and RTU, highly configurable, providing users with plug-and-play, high-performance, and highly secure bidirectional serial communication data encryption and decryption, supporting multiple international and national cryptography algorithms to ensure data transmission security and tamper-proof protection. Users do not need to modify any devices and software at both ends of the original serial communication link.
Suitable for high-intensity dynamic encryption and decryption communication of data in non-secure areas or public networks via serial communication links, supporting wired telephone networks or various wireless communication networks via modems in the middle of serial communication links, and supporting various communication protocols.

On-site I/O Equipment Simulation Test Platform (VC001)

Suitable for PAT testing of control systems before leaving the factory. The on-site I/O equipment simulation testing platform can automatically randomly simulate or manually set various DI/AI signals from on-site I/O equipment, sending them to the control system under test as input signals; It receives various DO/AO signal outputs from the control system under test, can monitor on the HMI screen, and record the timing of events.

I/O Signal Dual-Channel Switching Terminal Cabinet (VC002)

Used for quick wireless switching between new and old control system I/O signals, facilitating on-site debugging before the new system goes live. If any issues are found, it can be immediately switched back to the old system to ensure normal system operation.

Fiber Optic Network Hub and Distribution Area Cabinet (VC003)

Installed and deployed in different areas of the site, they centrally supply power and network functions to distributed RTUs, sensors, or cameras within the area. Connection to on-site terminal devices via power cables, network cables (including POE cables), serial cables, optical fiber, and terminal interface conversion devices, and centralized connection to the central control room cabinet via network cables or fiber optics.

Specifications and configuration:
Exterior style: Available in indoor and outdoor sizes; please refer to the product introduction for details.
Material: 201 or 304 stainless steel; please refer to the product introduction for details.
Installation methods: floor-standing, wall-mounted
Configuration: lightning protectors, circuit breakers, circuit breakers, circuit breakers, terminal blocks, cable trays, rails, fiber optic patch cords, fiber optic terminal boxes, fiber optic transceivers, optical modules, DC power modules, POE switches, etc. Specific configurations can be customized according to customer requirements.

Fiber Optic Network Wiring and Power Terminal Box (VC004)

Installed next to on-site terminal devices, it powers and provides networking for terminal devices such as RTUs, sensors, or cameras. Connecting field terminal devices to fiber network hubs and distribution area cabinets via power lines, network cables (including POE cables), serial cables, optical fibers and their terminal interface conversion devices, etc.

Specifications and configuration:
Exterior style: Available in indoor and outdoor sizes; please refer to the product introduction for details.
Material: 201 or 304 stainless steel; please refer to the product introduction for details.
Installation methods: wall-mounted, clamps.
Configuration: lightning protectors, terminal blocks, cable trays, rails, fiber optic patch cords, sockets, fiber optic terminal boxes, fiber optic transceivers or POE switches with optical ports, DC power modules, etc. Specific configurations can be customized according to customer requirements.

Fire protection system simulation device

It achieves 1:1 simulation of the intelligent network display controller, operation terminal, linkage panel, fire door monitor, power status monitor, indicator light and operation button monitoring panel, and control console (piano cabinet). Its appearance, size, screen display and operation mode, indicator lights, buttons, audio sound, print content and format, and other technical specifications, functions, and performance are consistent with the device being simulated. This allows trainees to practice and learn how to use the device through this device.

Electro-Hydraulic Servo Valve Simulator (VEHSVS)

The GRE electro-hydraulic servo valve simulator hardware adopts a modular design, including 14 independently operating electro-hydraulic servo valve analog circuit boards that correspond one-to-one to the valve modules. The electro-hydraulic servo valve analog circuit board is connected to the external valve module via a 15-pin D-type head. All electro-hydraulic servo valve analog circuit boards are connected via RS485 serial bus, then connected to the computer serial port via the RS485/232 conversion module. This allows the current drive signals and valve opening signals for 14 valves to be displayed on the computer screen

Battery Bluetooth internal resistance real-time monitoring and analysis system (BAT series)

Used to detect discharge data of single series battery packs, replacing manual battery testing.
Regular charge-discharge tests can be performed on the battery, and the test data is stored in internal memory, allowing maintenance personnel to simply read the data using a laptop.
By connecting it to the laptop with a dedicated cable, you can easily collect and analyze the battery's charge-discharge history data.
Regular battery monitoring data or real-time data can be transmitted to the remote host computer via modem or GSM wireless communication modules, facilitating battery management and monitoring.